Loctite EQ RC24 RD, Operating Manual

Page: 48 / 60

OPERATING ELEMENTS
48
With the time monitoring you can – in combination with a shut-off valve – limit the
maximum pump running time. This protects the pump.
The function is active, if
- in the interface settings the dispense start is set to external and
- the start is carried out via the external interface XS10 and
- the value of the time monitoring is not set to 0 s.
The Flow rate is used to set the feed rate in ml/min.
With the retraction you determine the quantity of the suck-back by the pump after the
dispensing process in order to prevent dripping. If the value is set to 0.0, the suck-back is
deactivated.
Dispense Pump Menu
After opening the dispense pump menu , the following screen appears:
Here you can choose the pump type of the connected pump.
By tapping on the desired type, all parameters are adjusted accordingly.
Flow rates when using Loctite standard rotor pumps:
Loctite Part No. Pump
Type
Minimum
Flow Rate
(at 3 RPM)
Maximum
Flow Rate
(at 100 RPM)
Minimum
Dispense Volume
97665EC Type 6 0.36 ml/min 12 ml/min 0.0075 ml
97669EC/97663EC Type 8 1.05 ml/min 35 ml/min 0.02 ml
Type 10 for future use
97660EC/97668EC Type 12 4.95 ml/min 165 ml/min 0.1 ml