LNS Sprint 545 S2, Instruction Manual

Page: 85 / 114

CHAPTER 8: HANDLING 8-13
SPRINT 545/565S25
4.2. Access to the functions
By pressing the MENU key, it is possible to access the setting functions.
To edit these parameters, the bar feeder must be in
STOP mode.
To validate a new parameter or a new value, keep [ENTER] pressed until the icon
disappears.
Depending on your lathe or your production needs, some of the parameters may not be
visible. The additional parameters to be displayed can be selected under
SERVICE >
DISPLAY.
Part
Used to define the parameters and values
of the part, e.g.:

Bar stock shape (round, hex, square,
other, diameter)

Feeding length

Number of collet openings

Feeding length for the auxiliary part
(remnant machining)
Application
Used to quickly set the working mode by
selecting the desired application. Following
working modes are always available:

Feed with /without turret

Dry Run
Positions
Quick access to the current position
values:

End of bar

Top-cut position

Auxiliary end of bar

Front rest opening position
Torques
Quick access to the current torque values:

Torque for the bar loading

Torque for part feeding
Language
Access to other languages
Miscellaneous functions

Referencing position

Front rest setup

Timings on lathe’s clamping device
Library
This function allows for loading, adding,
saving, replacing a part
Service
Reserved for LNS technicians for
maintenance and displaying masked
parameters.