LNS Sprint 545 S2, Instruction Manual

Page: 18 / 114

3-2 CHAPTER 3: SYSTEM START UP
SPRINT 545/565S2
1. TRANSPORTATION
Please read the safety instructions provided at the beginning of this manual before
handling the following devices.
1.1. Description
Depending on its destination, the bar feeder may be delivered either on a pallet, or packed in a wooden
crate. When transported by sea or air, the second solution is recommended. Regardless of the type of
packaging, the uncrating and lifting instructions recommended by LNS must be observed in order to
prevent any injuries to persons or damage to objects. These instructions are stapled to the crate of the
bar feeder.
Crate Pallet
Type 3m, 4m, 12’ 3m, 4m, 12’
Width 1150 mm 90 mm
Length 4700 mm 4800 mm
Height 1750 mm ---
1.2. Unpacking
For practical and safety reasons, the bar feeder must be unpacked in a spacious, well-lit location.
Check that the hoisting crane or lift truck has sufficient lifting capacity before starting
handling of the merchandise. Ensure that no one is in the vicinity of the suspended load, or
within the operating range of the hoisting crane.
1)
If the bar feeder is received in a crate, start
by unscrewing the front panel.
2)
Remove the top.
3)
Remove the side walls.
1
2
3