LNS Sprint 545 S2, Instruction Manual

Page: 95 / 114

CHAPTER 8: HANDLING 8-23
SPRINT 545/565S25
5. PARTS LIBRARY
The party library is only operational if an optional memory extension card is installed on
the PLC. Please contact LNS for more information.
PART LIBRARY
The main « Parts Library » shows the current state of
the library.

Active part: shows the part ID currently in use.

Total parts: shows the total number of parts
stored in the library.
(the underlining denotes the current part)
LOAD PART
This screen allows recalling and loading the
parameters of an existing part from the parts library into
the parts parameters, by calling its part ID.
ADD PART / OVERWRITE EXISTING PART
This screen allows adding a new part to the Parts
Library by storing all the current parameters under a
new part ID.
Caution: Entering and confirming an existing ID
overwrites the stored parameters with the new ones.
Once confirmed, the parameters of the old ID are
permanently overwritten in the Parts Library and cannot
be recovered.
DELETE PART
This screen allows deleting a part from the Parts
Library by calling its part ID.
Caution: Entering and confirming an existing part no.
deletes all the parameters for this no. Once the
operation has been confirmed, the parameters for the
part are permanently deleted and cannot be recovered.