LNS Sprint 545 S2, Instruction Manual

Page: 80 / 114

8-8 CHAPTER 8: HANDLING
SPRINT 545/565S2
3.1. Guiding elements adaptation
Depending on the bar stocks to feed, a changeover of the guiding elements (bearings, pusher, collet,
front rest adjustment) may be necessary.
The elements of the cover must only be replaced if they are worn or damaged.
The guide channels may be damaged by corrosive products.
Use a soft cloth to clean them.
Conditions:

Guiding channel opened

No bar stock in the magazine

Pusher in home position

Bar feed system in STOP mode
Procedure:
On the remote control, use the manual functions to move back the pusher to its reference, in lifted
position.
1
[STOP]
Press the
[STOP] key.
2
Enter the manual menu.
3
Select the pusher changeover function.
The text "READY TO START PUSHER CHANGEOVER CYCLE» is displayed on
the screen.
Start the function.
Le pusher goes to its changeover position.
Follow the instructions on the remote control.
A
B
C
E
D
D