Lissmac COMPACTCUT 201 D, Operating Manual

Page: 29 / 84

29/84
5. TRANSPORT
5.1. Transport position
WARNING
Crushing due to unsecured machine
Injuries due to the unintentional change of the position of the machine or the falling of parts.

Only transport the floor saw in transport position.
 Lash and secure the floor saw with suitable means.
NOTICE
Machine transport
Significant inclines must be avoided when transporting the floor saw.
Fuel may leak out, or engine oil run into the combustion chamber of the motor and damage the motor.
Maximum inclination on all sides 30°. Do not lay the machine on its side. Only transport upright.
All moving parts that may fall or swing during transport must be removed.
Transport position • Activate the parking brake (#1)
•
Ignition switch to OFF (#2), CC201P/PV/PL only
•
Shut fuel tap (#3), CC201P/PV/PL only
•
Remove the saw blade and shut and secure the blade guard again (#4).
•
Fold the steering rod in towards the machine (#5).
•
Empty the water tank and secure with a lashing strap (#6)
!
2
1
6
5
4
3