Lissmac COMPACTCUT 201 D, Operating Manual

Page: 11 / 84

11/84
2. GENERAL SAFETY INSTRUCTIONS
2.1. Purpose; intended use
The manufacturer and supplier do not accept any liability for incorrect or non-intended use. Any
modification to the machine not carried out by the manufacturer is forbidden. Changes due to
attachments or conversions to the floor saw are only to be carried out by the manufacturer with
written approval.
This machine has been built according to the state of the art and recognised safety regulations. Its use
can, nevertheless, result in hazards for life and limb of the user or third persons, as well as damage to
the machine and other material assets.
The machine must only be used if it is in technically perfect condition and for its intended use, with an
awareness of safety and potential dangers and as set out in the Operating Manual. In particular,
always resolve faults which may impair safety, or have them resolved, immediately.
Intended Use The LISSMAC floor saw is a type of floor cutting grinder and is designed exclusively for cutting joints
in concrete or asphalt. The floor saw may only be operated by one person. The operator must stay
behind the push rods when cutting. Any other use or use beyond this is deemed non-intended.
Proper use also includes compliance with the operating instructions and compliance with the
inspection and maintenance instructions.
Improper Use
Foreseeable misuses / non-intended use:
•
Cutting without blade guard
•
Cutting without water
•
Cutting on steep slopes
•
The cutting of narrow radii
•
Cutting loose material
•
Cutting wood, plastics or metal
(except reinforced concrete)
• Design modifications which alter the safety or design type of the floor saw