Lissmac COMPACTCUT 201 D, Operating Manual

Page: 12 / 84

12/84
2.2. Organisational measures
This Operating Manual must be kept within easy reach for everyone at the place of use.
Supplements to the operating manual include general statutory and other binding regulations for
preventing accidents and protecting the environment and must be obeyed.
Such regulations may also deal with, for example, the handling of hazardous substances, the wearing
of personal protective equipment and with road traffic regulations.
The personnel assigned to work on the machine must have read and understood the Operating
Manual, and especially the chapter on Safety instructions, before beginning the work. This applies in
particular to personnel becoming active at the machine only occasionally, e.g. maintenance personnel
Regularly check the safety- and hazard-aware work of the personnel in compliance with the
instructions in the Operating Manual.
Always use the necessary and stipulated personal protective equipment.
Observe all safety and hazard warnings on the floor saw, and maintain them in a legible condition.
Replace damaged or illegible safety and hazard warnings.
If there are any changes to the machine or operating behaviour which may affect safety, stop the
machine immediately and put up warning signs accordingly. Report the fault to the responsible
office/person.
Do not make any modifications through extensions or conversions without the manufacturer’s written
consent. The tool manufacturer’s instructions must be adhered to.
Use only checked original spare parts of the manufacturer.
Adhere to prescribed periods for inspection or those specified in the operating manual.
For the implementation of maintenance measures, workshop equipment appropriate for the work is
absolutely necessary.
Machines with internal combustion engines must not be used in closed rooms.
Always obtain detailed information on underground gas, electricity and telecommunications lines in
the cutting area and take appropriate precautions before cutting.