Lissmac CC401 E, Operating Manual

Page: 12 / 48

12/48
2.3. Choice of personnel and qualifications; fundamental obligations
Operators must be at least 18 years of age and mentally and physically capable of operating the floor
saw. All persons must be instructed in the operation and be expressly assigned, in writing by the
employer, to operate the floor saw.
Specify the responsibilities of the personnel for operation, set-up, maintenance and repair.
Ensure that only the expressly assigned personnel work on the machine.
The operator must wear personal protective equipment such as safety shoes, gloves, goggles and
hearing protection that comply with the safety regulations.
Ensure persons not working with the machine are vacated from the work area. If necessary, close off
the working area.
If the floor saw is in motion, the operator must ensure he does not endanger himself and other
persons. All obstructions at the place of work which hinder the work procedure or the use of the
machine must be removed.
Work on the machine’s electrical equipment may only be carried out by a qualified electrician or by
trained personnel under the management and supervision of a qualified electrician and in compliance
with the electronic regulations.
The operator must be specified as the responsible party with respect to traffic regulations, and must
be authorized to refuse to execute third-party instructions that violate safety regulations.
Only allow personnel being trained, instructed or those completing an apprenticeship to work on the
machine under the constant supervision of an experienced person.
2.4. Safety notices regarding the operating phases
2.4.1. Transport, assembly and installation
Transport, assembly and installation of the floor saw may only be executed when the engine has been
switched off and the power supply has been disconnected.
The machine may only be transported when all parts have been tightened and individual parts cannot
fall off.