Lissmac CC401 E, Operating Manual

Page: 20 / 48

20/48
3.5. Electrical voltage
WARNING
Danger of electric shock
The machine works with high voltages and currents. The user can suffer fatal electric shocks due to
damaged lines or electrical components.

Do no operate the machine with damaged electrical components

Immediately replace defective cables or components

Do not use the machine if it cannot be switched on and off via the switch
 Always completely unroll cable drums.

Only connect via power sources with integrated fault current circuit breaker or an RCD

Only connect using cables with PE wires and a suitable wire diameter

Lay cables so they do not pose a tripping hazard and do not lay them in puddles or over sharp
edges

Do not cut into the cable

Always pull the plug before shutting off the machine