Lissmac CC401 E, Operating Manual

Page: 28 / 48

28/48
6. OPERATION
6.1. Safety
General rules
•
The floor saw may only be operated by one person.
Banish other persons from the work area, or create a barrier.
•
The operator is not permitted to leave the machine while the motor is running.
• Never start the machine if the saw blade is in contact with the floor.
This overloads the drive unit.
•
Do not correct cutting errors with “brute force”.
This will only result in damage to the saw blade and machine.
•
Never turn the machine off within the cut. Always remove the blade from the joint first.
• Do not operate the machine when suffering from fatigue or exhaustion, or under the influence of
alcohol, drugs or medication.
•
Only use saw blades with suitable type and dimensions.
•
NEVER use damaged saw blades.
• Keep the machine clean and only operate it in a technically perfect condition.
•
Ensure a stable water supply.
• Remove all obstacles from the cutting area.
•
Ensure good lighting at night.
•
Only make straight cuts.
•
Make sure cables are laid cleanly.
•
Do not create any tripping hazards, do not cut cables, do not lay cables in puddles.
DANGER
Danger due to underground supply lines
Danger due to cutting into water, power, gas or telecommunications lines.
Electric shock, burns, explosion and the interruption of emergency call devices are possible.

BEFORE cutting, obtain detailed information about cables and cable routing in the work area from
the relevant authority

Create an emergency plan. Keep the contact number of the supply contractor

Inform the competent supply company

Wear personal protection equipment
WARNING
Cut hazard
Serious injuries due to a rotating saw blade or ejected parts.

Only cut with the blade guard closed.

Maintain a safe distance.
 Never touch the rotating saw blade.
 Wear personal protection equipment.