Lissmac CC401 E, Operating Manual

Page: 37 / 48

37/48
7. SERVICING
7.1. Maintenance
WARNING
Cut and crush hazard
Serious injuries when coming into contact with a rotating saw blade or belt drive.

Maintenance and repairs may only take place when the machine is switched off

Maintenance and repairs may only be carried out by trained personnel.

The machine must be secured against anyone else switching it on.
Cleaning
To protect the paint surface, no aggressive or abrasive cleaning agents may be used.
Do not use a high-pressure cleaner on the motor and switching elements!
Spare parts Only original spare parts from the manufacturer may be used.
Warning signs
Regularly check machine for damaged or missing safety signs and stickers.
Replace illegible or damaged safety signs immediately.
Material See: 5.1 Operating materials
before each
use
daily weekly monthly
Visual inspection for recognizable damages and defects

Thoroughly clean the floor saw (depending on use)

Lubricate the cutting shaft bearing

Lubricate the lubrication points every 40 operating hours
Inspect the safety equipment

Retighten the drive belt (for the first time after 2 operating hours)

Screw connections Tighten all screw connections after 20 hours of service.
The maintenance specifications are based on the standard, proper intended use. When using the machine under extreme climate conditions
or in continuous operation, the service intervals must be adjusted accordingly.