Lissmac CC401 E, Operating Manual

Page: 15 / 48

15/48
2.5.2. Electrical energy
Only use original fuses with the specified amperage. The floor saw must be immediately shut off in
the event of malfunctions. Electrical work may only be carried out by certified qualified experts.
The machine’s electrical equipment must be inspected and tested at regular intervals. Defects, such
as loose connections or damaged cables, must be corrected immediately. The machine must be
marked to ensure that it will not be started by others.
2.5.3. Dust
When working in narrow spaces observe any existing national regulations.
To prevent dust accumulation while cutting, the saw blade must be continuously sprayed with water.
Do not eat, drink or smoke in the work area.
2.5.4. Noise
See Section 3.3
2.6. Transport
Only use a suitable transport vehicle with an adequate load capacity.
Secure the load properly in compliance with the regulations.
Even when only moving the unit a short distance, the blade drive must be decoupled or the saw motor
must be switched off.