background image

0

INTRODUCTION

We are constantly working on technical

improvement of our products. For this reason,

technical data, equipment and design are subject to

change without notice. All specifications,

illustrations and directions in this SERVICE DATA

are based on the latest products information

available at the time of publication.

For further information to service these models,

please refer to ECHO SERVICE MANUAL Ord. No.

401-20.

CHAIN SAW

CS-3000 CS-3050

CS-3400 CS-3450

SERVICE DATA

1

00-30A-03

CS-3000 CS-3050 CS-3400 CS-3450

CONTENTS

page

1 SERVICE INFORMATION  ............................ 2

1-1 Specifications ............................................ 2

1-2 Technical data  .......................................... 3

1-3 Carburetor data ......................................... 3

1-4 Torque limits  ............................................. 4

1-5 Special repairing materials  ....................... 4

1-6 Service limits ............................................. 5

1-7 Special tools  ............................................. 6

2 SERVICE HINT  ............................................. 7

2-1 Installing fuel pipes and grommet  ............. 7

2-2 Installing new oil pipe and grommet  ......... 7

2-3 Checking reed valve  ................................. 8

2-4 Replacing brake lever fasteners  ............... 8

Reference No. 

00-30A-03

REVISED :   199902

Issued:199204

Remarks:

Please use this revised edition (Reference No. 00-30A-03)

and discard all previous issues.

Printed in Japan

INDEX

Summary of Contents for CS-3000 TYPE 1E









Reviews: