![background image](http://html1.mh-extra.com/html/lipco/gsg-nv-series/gsg-nv-series_operating-manual_1927001042.webp)
Operating Manual
Cross-flow fan unit type GSG-NV1 / 2
42 - 64
010980-26-E BA GSG-NV1_2 / 23.03.2012
19. Emptying the GSG-NV after use
Plant protection agents are only allowed to be used on agricultural /
forested / horticultural surfaces.
This applies also to the remaining agent, which remains for technical
reasons in the tank and for the liquid, which cumulates during inner and
outer cleaning of the machine after use.
Plant protection agents should never remain in the
LIPCO GSG-NV
for an extended period; therefore, the precise amount of spraying
liquid needed should be calculated before spraying.
Remaining spraying liquid must be disposed according the regula-
tions of JKI Braunschweig.
When diluting with fresh water it is a good idea to add the water via
the tank cleaning nozzle. This allows the tank to be cleaned while
diluting the agent.
It is advisable to switch off the mixing unit for the last 50 l, in order to
empty the tank as far as possible.
20. Residual volume
For technical reasons, a certain volume of liquid will always remain
in the tank.
It cannot be removed by means of the pump and nozzle. The below
indicated remaining volume applies up to an inclination of 8%, high-
er inclination will create higher residual volume.
Remaining residual volume up to 8% inclination:
GSG-NV
25 l.
The residual volume cannot be removed by means of the pump and
nozzle.