Lipco GSG-NV Series Operating Manual Download Page 63 | Manualshive

Page: 63 / 64

Lipco GSG-NV Series Operating Manual Download Page 63

Operating Manual

Cross-flow fan unit type GSG-NV1 / 2

63 - 64

010980-26-E BA GSG-NV1_2 / 23.03.2012

32. EG Declaration of conformity

Manufacturer:

person authorized to compile the
technical files:

LIPCO GmbH

Günther Bauer

Am Fuchsgraben 5b

Ingenieurbüro Bauer

D-77880 Sasbach

Rieselfeldallee 39a

Tel.

+49 (0) 7841 6068-0

D-79111 Freiburg

Fax

+49 (0) 7841 6068-10

Tel.

+49 (0) 172 7694 903

E-Mail

[email protected]

Fax

+49 (0) 761 5565 576

Internet

http://www.lipco.com

E-Mail

[email protected]

Denomination:

LIPCO cross-flow fan unit with tank trailer

GSG-NV 1 / 2

Serial no:

Year of manufacture:

The manufacturer declares expressly, that the machinery fulfills all the rele-
vant provisions of the



Directive 2006/42/EC

To implement the safety and health requirements as stated in the CE Di-
rective, the following standard(s) and/or technical specification(s) has (have)
been applied:



EN ISO 4254-1, 06/06



EN ISO 12100-1 / EN ISO 12100-2



EN ISO 14121-1



DIN EN 907, 07/97

This declaration of conformity loses its validity, if changes or modifications
on the machine were made, which are not approved in writing before by
LIPCO.

Marietta Panter

- Managing partner -

Sasbach, 23.03.2012

(Place and date of issuing)

(Name, function and signature of responsible)

«
...
61
62
63
64
»

Summary of Contents for GSG-NV Series

































































Reviews:

No comments