Lipco GSG-NV Series, Operating Manual, Page: 31 / 64

Operating Manual Cross-flow fan unit type GSG-NV1 / 2
31 - 64 010980-26-E BA GSG-NV1_2 / 23.03.2012
If necessary, engage the sprayers until liquid is discharged even-
ly from the nozzles.

Switch off the LIPCO GSG-NV and again fill the tank to the se-
lected marking on the filling mandrel.

Conduct a spray text for at least 2 min.

Determine the volume of liquid used by refilling to the marking
and then compare with the calculated total discharge. (For
smaller amounts or to increase the accuracy of the measure-
ment, it may be necessary to spray for a longer duration.)

In case of deviations, correct the spray pressure and repeat the
procedure. Higher pressure results in a greater discharge of liq-
uid and vice versa.

Record the results in writing.