background image

HG-08 HVLP SPRAY GUN

INSTRUCTION MANUAL

INSTRUCTION MANUAL   HG 2-27-2017

Description:

HG- Manual Spray Guns are for use 

from Low to Medium Pressure with 

Light to Medium. They will cover a 

range of materials to include enamels, 

latex, lacquers, acrylics etc.  These 

Models require 2 to 4 C.F.M. at 20-

40 lbs. Air Pressure depending on 

thickness of Material being sprayed.  

Tip and needle are made of Stainless 

Steel and can handle water or solvent 

based materials.

Specification:

Part Number:      HG-08  

Type:                    HVLP Gravity Feed

Head Size:           .8mm (Optional sizes .5mm & 1mm)

Air Volume:         2-4 CFM

Air Pressure:       20-40 PSI            

Air Inlet:               ¼” NPT thread

Cup size:              3 oz (27SC) -   (Optional 8oz (28SC)

Spray Pattern:     1” to 7”

Weight:                .90 Lbs

Finish:                  Blue / Silver

Setup:

1. Blow out all airline hoses before connecting to the spray gun 

    to remove foreign particles.

2. Connect air hose to air inlet fitting.

3. Connect fluid cup or fluid hose to fluid inlet.

4. Tighten all hose connections securely.

5. Adjust air pressure to required amount at the regulator.

6. Adjust fluid volume by turning the fluid control knob.

7. The Fan pattern is controlled by turning the fan control Knob

8. Test spray on some cardboard or news paper for final

    adjustment before spraying your project.

Reviews: