
Operating Manual
Cross-flow fan unit type GSG-NV1 / 2
25 - 64
010980-26-E BA GSG-NV1_2 / 23.03.2012
14. Driving on roads with the GSG-AN2
Special points to be observed when driving on roads!
Maximum allowable speed is 25 km/h.
Take care, when driving narrow curves or on uneven surfaces.
In this cases or when tanks are not completely empty, it might be
necessary to lower the speed to reduce the tilting danger.
Lights:
The lights of the tank trailer
must be properly connected to
the towing vehicle to ensure
safe operation in traffic. (Fig.
19)
Connect lights via the 7-pin
12V plug on the tractor.
Fig. 19
The outer fan units must be in the inner position, i.e. completely
pushed together, and the hydraulic drive must be switched off.
To prevent the outer fan units from moving apart while driving,
manual shut-off valves are built into the pressure lines of the hy-
draulic cylinder that is pressurized when extending the fan units.
These valves must be closed when driving on roads.
Shut-off valve:
The shut-off valves must al-
ways be closed when driving
on roads. (Fig. 20)
To spray at a later time, the
valves must be opened again.
The shut-off valves are located
in the pressure lines and are
marked with a red cap.
Fig. 20
to tractor
open