background image

Instruction Manual

AUTOMATIC SPRAY GUNS

• TOF-5B TOF-5RB

(Round Pattern)

Common air source for atomizing air and piston operating air

• TOF-6B TOF-6RB

(Round Pattern)

Different air source for atomizing air and piston operating air

T462-01EREV

.00

Measuring conditions: 

Tested with water at 3.0 bar.

2. SAFETY WARNING

FIRE AND EXPLOSION

1.  Never use the following HALOGENATED HYDROCARBON SOLVENTS:

which can cause cracks or dissolution of gun body (aluminium) due to 
chemical reaction. UNSUITABLE SOLVENTS: methyl chloride, dichloro-
methane, 1.2-dichloroethane, carbon tetrachloride,  trichloroethylene, 
1.1.1-trichloroethane                          

2.  Sparks and open flames are strictly prohibited.

Paints can be highly 

flammable and can cause fire.Do not expose to open flames, electrical 
goods, cigarettes etc.

3.  Securely ground spray gun using grounded gun stay. 

Ground resistance : Less than1M

Ω

.

Ω

Check the earth stability periodically. If not, insufficient grounding can cause 
fire  and explosion due to static electric sparking.

4.

Do not use corrosive liquid (acid and alkali, etc.)

Before using corrosive liquids, make sure that they are compatible with the 
gun components. We can provide you with a list of materials used in 
the product.

ALWAYS observe WARNINGS and CAUTIONS in this 
instruction manual.

This  ANEST IWATA spray guns kit complies
to ATEX regulations 94/9/EC, protection level:
II 2 G X Suitable for using Zones 1 and 2.
X marking: Any static electricity discharge from the spray gun is to be
diverted to the ground via the conductive air hose as stipulated. 

Before use, adjustment or maintenance, it is important
to read this instruction manual very carefully. This ma-

nual must be stored in a safe place for any future reference.

PROTECTION OF HUMAN BODY

1. Use in a well-ventilated site, using a spray booth.

Poor ventilation can cause organic solvent poisoning and fire.

2. Always wear protective gear (safety glasses, mask, gloves) to avoid 

inflammation of eyes and skin.

In case of any physical discomfort, immediately seek medical advice.

3. Wear earplugs if necessary.

Noise level can exceed 85 dB(A), depending on operating conditions and 
painting site.

IMPROPER USE

1.  Never point gun towards people or animals.

2.  Never exceed maximum working Pressure or maximum operating 

Temperature.

3.  Always release air and fluid pressure before cleaning, disassembling 

or servicing.

Otherwise, remaining pressure can cause bodily injury due 

to improper operation or scattering of cleaning liquid.

4.  Tip of fluid needle set has a sharp point. 

Do not touch the tip during maintenance to avoid accidents.

5. Never use this gun to spray foods or chemicals. 

Otherwise, foreign substance, could cause corrosion of fluid passages 
which could adversely affect health.

6. Never alter this spray gun, 

to avoid insufficient performance and dam-

age.

7. If something goes wrong, immediately stop operation and find the 

cause. Do not use again, until you have solved the problem.

8. Do not enter working areas, where robots, reciprocators, etc. are used,

until they have been turned off. 

Otherwise, they could cause injury.

3. HOW TO CONNECT

IMPORTANT

-  This gun should be operated by adequately trained operators only.  
-  Ensure that the gun has not been damaged during transportation.

CAUTION

- Use clean air filtered through air dryer and air filter.

If not, dirty air can 

cause coating failure.

- If you use this gun for the first time after purchasing, clean fluid pas-

sages to remove rust preventive oil spraying by claenar.

If not, remain-

ing preventive oil can cause painting failure such as fish eyes.

- Use three-way solenoid valve with effective cross section of more than 

4 mm inner dia. area and air hose of over ø 4 mm inner diameter and 
less than 10m length. When operate multiple guns, use larger size of 
solenoid valve cross section and hose inner diameter accordingly. 

If not, small diameter of solenoid valve and longer air hose between 
three-way solenoid valve and gun can cause delay in operation. 

- Firmly fix hose to spray gun.

If not, disconnection of hose can cause 

bodily injury.

Symbol

WARNING

Hazard level

Consequence

WARNING

Potentially hazardous  Death or serious injury
situation

CAUTION

Potentially hazardous  Minor to moderate injury
situation

IMPORTANT

Potentially hazardous  Property damage
situation

Model

Nozzle  Air cap Fluid 

Air

Pattern Width

Weight

size

set 

output consumption

Spray distance 300 mm

Ø mm

Mark ml/min Nl/min (cfm) 

mm (in)

g (lbs)

Pressure feed

TOF 5B-5RB 0.5

TOF 6B-6RB 0.5

TOF 5B-5RB 1.0

TOF 6B-6RB 1.0

TOF 5B-5RB

1.3

TOF 6B-6RB

1.3 

TOF 5B-5RB 2.0

TOF 6B-6RB

2.0

1. TECHNICAL SPECIFICATIONS

Max. working air pressure: 6.8 bar (98 PSI)

Air connection:

G 1/8”

Noise Level (LAeqT)*:

69.4 dB (A) 

Fluid connection:

G 1/8”

Max. Temperature range:

5 ~ 40 °C

60

250

360

600

200

(7.9)

250

(9.8)

350

(13.8)

400

(15.7)

50

(2.0)

70

(2.8)

80

(3.1)

90

(3.5)

05

10

13

20

60

(2.1)

80

(2.8)

100

(3.5)

140

(4.9)

40

(1.4)

50

(1.8)

55

(1.9)

85

(3.0)

TOF 5B

320 (0.71)

TOF 5RB

300 (0.66)

TOF 6B

330 (0.73)

TOF 6RB

310 (0.71)

Fun

Round

Fun Round

* Measuring point: 1m backwards from gun, 1.6m height.          

GB

Manufactured by: 

ANEST IWATA Corporation 

3176,Shinyoshida-cho, Kohoku-ku, Yokohama, 223-8501 Japan

ANEST IWATA Italia S.r.l.

Corso Vigevano, 46 - 10155, Torino (Italy)
Tel. d39 011 - 24 80 868 - Fax: +39 011 - 85 19 44
[email protected]

www.anest-iwata.it

ANEST IWATA Iberica

Calle de Les Teixidores, 3-5
08918 - Badalona (Barcelona)
Tel.:+34 93 32 05 993 - Fax.:+34 93 32 05 965
[email protected]

www.anest-iwata.es

ANEST IWATA Deutschland

Mommsenstrasse 5

04329 Leipzig

Telefon: +49 (0)341 241 44 30 - Fax: +49 (0)341 252 55 95

[email protected]      

www.anest-iwata.de

ANEST IWATA Europe S.r.l.

Corso Vigevano, 46 - 10155, Torino (Italy)
Direct Tel. +39 011 - 22 74 402
Fax +39 011 - 22 74 000
[email protected]

www.anest-iwataeu.com

ANEST IWATA Scandinavia 

Ögärdesvägen 6C, 433 30 PARTILLE - Sweden 
Tel. +46 (0)31 - 340 28 60 - Fax +46 (0)31 - 340 28 69
[email protected]

www.anest-iwata.se

ANEST IWATA France 

25 rue de Madrid - 38070 St Quentin Fallavier - France
Tél. +33 (0)4 - 74 94 59 69 - Fax +33 (0)4 - 74 94 34 39
[email protected]

www.anest-iwata.fr

ANEST IWATA  U.K.

Unit 10 Little End Road - Eaton Socon
St. Neots - CAMBRIDGESHIRE
PE19 8JH 
Tel.: +44 (0) 1480 40 54 19  Fax: +44 (0) 1480 21 76 10
[email protected]

www.anest-iwata.co.uk

European Sales Branches:

Summary of Contents for TOF-5B

Page 1: ...een turned off Otherwise they could cause injury 3 HOW TO CONNECT IMPORTANT This gun should be operated by adequately trained operators only Ensure that the gun has not been damaged during transportation CAUTION Use clean air filtered through air dryer and air filter If not dirty air can cause coating failure If you use this gun for the first time after purchasing clean fluid pas sages to remove r...

Page 2: ...ssed air pressure to the pressure feed tank 2 Open and close fluid adjustment knob of gun Fluid output becomes zero when fluid adjustment knob of gun is turned fully clockwise Fluid output gradually starts increasing when fluid adjustment knob is turned 0 5 turn counterclockwise from zero point and fluid output stops increasing when fluid adjustment knob is 4 full turns counterclockwise 4 The patt...

Page 3: ...DJ KNOB 1 6 2 PLUG TOF 5RB 6RB 1 7 HOLDER 1 8 HEX NUT 1 9 BOLT 1 10 NIPPLE 2 3 R Marked parts are wearable parts 6 MANUTENZIONE ED ISPEZIONE ATTENZIONE Mai utilizzare parti di ricambio che non siano originali ANEST IWATA Mai danneggiare i fori dell ugello aria dell ugello materiale e l estre mità dell astina Mai immergere completamente la pistola nei liquidi come solvente 6 1 PULIZIA MANUALE Mai l...

Page 4: ...ossare sempre indumenti protettivi occhiali di protezione maschera guanti Per evitare che il contatto con i materiali irritanti provochi infiamma zione agli occhi ed alla pelle Nel caso in cui si verificasse anche il più lieve ris chio di danno fisico consultare immediatamente un medico 3 Se è necessario indossare i tappi afonizzanti Il livello di rumorosità può superare 85 dB A e dipende dalle co...

Reviews: