Turf Walker SC
Assembly Instructions
Spraying Devices
Inc.
Product/Ser vice
Congratulations on your purchase of the SDI Turf Walker SC self contained
walking spray boom! We know you’ll be delighted with your purchase and it will
serve you well for many years.
After opening the box, remove the packing
material and inspect for damage that might
have occurred during shipping. You should
have all the parts shown at left.
1)
Move the frame tubing (#9 on drawing)
to the upright position and insert the 3/8 x 1
1/4
″
(#60) bolt into the lower hole on each
side.
2)
Install the wheels on the axle
(#33) using the supplied bolts attaching
the wheel with longest bolt in the cen-
ter position. Be sure the magnet faces
the speedometer pickup on the axle.
3)
Attach the spray gun to the top
of the frame tubing using the existing
3/8 x 1 1/4
″
bolt.
Phone: 559-734-5555
Fax: 559-734-5591
[email protected]
www.sprayingdevices.com
PO Box 3107
Visalia, CA 93278-3107
Spraying Devices Inc.
