manualshive.com logo in svg

Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print Server, User Manual

Share
Download
Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print Server User Manual Download Page 63

56

Appendix D: Upgrading Firmware

Wireless-G PrintServer for USB 2.0

Appendix D: Upgrading Firmware

The PrintServer’s firmware is upgraded through the Bi-Admin Management utility. Follow these instructions:

1. Download the firmware from Linksys’s website at 

www.linksys.com

. 

2. Open the Bi-Admin Management utility.

3. Click 

Main

 => 

Upgrade Firmware

.

4. Click the 

Files...

 button to browse for the file.

5. The 

Detected LAN Cards

 screen will appear, as shown in Figure C-2. Select the LAN card the PrintServer is 

connected to, and then click the 

OK

 button. Select the firmware file you want to use. 

6. View the 

BIN File Information

 screen, and click the 

OK

 button if you have selected the correct firmware file. 

Click the 

Cancel

 button to select a different firmware file. 

7. On the 

Upgrade

 screen, click the 

Upgrade

 button. Click the 

Cancel

 button to cancel the firmware upgrade. 

For more information, click the 

Help

 button.

Figure D-1: Upgrade Firmware

Figure D-2: Detected LAN Cards

Figure D-3: BIN File Information

Summary of Contents for WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print Server













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands