manualshive.com logo in svg

Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print Server, User Manual

Share
Download
Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print Server User Manual Download Page 28

21

Chapter 6: Configuring the PrintServer Using the Web-based Utility
The Protocol Tab - SNMP

Wireless-G PrintServer for USB 2.0

The Protocol Tab - SNMP

Use the screen shown in Figure 6-6 to view or change the PrintServer’s SNMP (Simple Network Management 
Protocol) settings.

The PrintServer supports SNMP, which allows network administrators to monitor and control the PrintServer 
through the use of network management platforms, such as HP OpenView.

The appropriate MIB file must be imported into your SNMP management program using the Import-Compile 
command. Check your program’s documentation for details on this procedure. The MIB file is named Mib2p.mib 
and is provided in the MiB folder on the Setup CD-ROM.

General

. Enter the name of the contact person in the 

SysContact

 field. Enter the location of the contact person in 

the 

SysLocation

 field.

Management Stations

. Select the number of the management station from the 

Station No.

 drop-down menu (1-

4). Click the 

Get Data

 button to display the information for the selected station.

In the 

IP Address

 fields, enter the IP address of the management station with the SNMP program installed. In the 

Community field, enter the name of the SNMP community, which is usually 

public

 or 

private

. From the Access 

drop-down menu, select the desired level of access for this management station, 

Not Accessible

, 

Read-only

, or 

Read/Write

.

Trap Receivers

. Select the number of the trap receiver from the 

Receiver No.

 drop-down menu (1-4). Click the 

Get Data 

button to display the information for the selected trap receiver.

In the 

IP Address

 fields, enter the IP address of the trap receiver that will be sent the trap messages or 

notifications. In the 

Community

 field, enter the name of the SNMP community, which is usually 

public

 or 

private

. 

To designate a severity level, click the checkbox next to 

Enable with Severity level

. From the following drop-down 

menu, select the desired level of severity, with 1 meaning least severe.

Click the 

Save 

button to apply your changes, or click 

Cancel 

to cancel your changes.

Figure 6-6: Protocol Tab - SNMP

Summary of Contents for WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print Server













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands