40
Wireless-G PrintServer for USB 2.0
Chapter 8: Bi-Admin Management
The Bi-Admin Management Utility
SNMP
(Figure 8-19)
•
SysContact
. Enter the name of the contact person in the
SysContact
field.
•
SysLocation
. Enter the location of the contact person in the
SysLocation
field.
•
Configuration Item
. From the
Configuration Item
box, select the number of the management station (M1-
M4) or trap receiver (T1-T4). The selected item’s information will be displayed below.
For management stations, you can change the station’s IP address, Community String, and Access
Permission level. In the
Manager IP Address
fields, enter the IP address of the management station with
the SNMP program installed. In the
Community String
field, enter the name of the SNMP community,
which is usually
public
or
private
. In the
Access Permission
section, select the desired level of access for
this management station,
Read Only
,
Read/Write
, or
Not Accessible
.
For trap receivers, you can change the trap receiver’s IP address, Community String, Trap Option, and
Trap Severity level. In the
Trap Receive IP Address
fields, enter the IP address of the trap receiver that will
be sent the trap messages or notifications. In the
Community String
field, enter the name of the SNMP
community, which is usually
public
or
private
. For the Trap Option setting, select
Enable
or
Disable
. For
the Trap Severity setting, select the desired level of severity, with 1 meaning least severe.
Click the
Get Defaults
button if you want to cancel your changes and use the default settings.
When finished making your changes on this tab, click the
OK
button to save these changes, or click the
Cancel
button to undo your changes. For more information, click the
Help
button.
Figure 7-19: Configuration - SNMP
