Page 20 of 35
01.07.2019
Limpar WKB 750
Swing the handlebar into operating position.
Slide the handlebar core into the tube of the handlebar
and align the bores.
Fix the first end of the handlebar in place as shown in Fig.
4. Do not tighten the screw connection firmly yet.
Repeat the procedure on the other side.
Firmly tighten the threaded unions of handlebar.
Fig. 4: Sectional view of handlebar threaded union
Stop nut M10
Chassis
Handlebar
Washer
Ø 10.5
Truss-head screw
M10x40
Washer
Ø17
Handlebar
Direction of movement
Commissioning
Handlebar core
Here flush with the
end of the handlebar
Here flush with the
end of the handlebar
