SFA-5000 • SFA-10000 CANopen®
4 - Electrical connections
WARNING
Installation, electrical connection and maintenance operations must be carried
out by qualified personnel only, with power supply disconnected. Mechanical
components must be in stop.
4.1 Connection cap
WARNING
Do not remove or mount the connection cap with power supply switched ON.
Damage may be caused to internal components.
The terminal connectors for connecting the power supply and the BUS IN and
BUS OUT cables (PG cable version) as well as the DIP switches meant to set the
node ID and the baud rate and activate the termination resistance (PG cable
version and M12 connector version) are located inside the encoder connection
cap. Thus you must remove the connection cap to access any of them.
NOTE
Be careful not to damage the internal components when you perform this
operation.
MAN SFA_5000_10000_CB E 1.0.odt
4 - Electrical connections
26 of 88
