5.SoftwareControl-LightwareDeviceController
HDMI-TPS-RX110AY series – User's Manual
63
Appliedfirmwarepackage:v1.5.0b3 | LDCsoftware:v2.5.9b2
5.11.
Advanced View Window
1
2
3
7
6
5
4
1
LW3 protocol help
Pushing the button results a help window opening which describes the most
importantinformationaboutLW3protocolcommandsinHTMLformat.
2
Edit mode
The default appearance is the read-only mode. If you want to modify the
valuesorparameters,ticktheoption.Youwillbepromptedtoconfirmyour
selection.
3
Warning mode
If this is checked, a warning window pops up when you enable Edit mode.
4
Node list
Correspondent parameters and nodes are shown which are connected to the
selected item in the protocol tree.
Manual
button:
Manual (short description) of the node can be called and
displayed in the terminal window.
Set
button:
Savesthevalue/parametertypedinthetextbox.
Call
button:
Calls the method, e.g. reloads factory default settings.
5
Protocol tree
LW3protocoltree;selectanitemtoseeitscontent.
6
Command line
Type the desired command and execute it by the
Send
button. Clear all current
commands and responses in the Terminal window by the
Clear
button.
7
Terminal window
Commands and responses with time and date are listed in this window. Sent
command starts with ‘>’ character, received response starts with ‘<’ character.
The color of each item depends on the type of the command and response.
The content of the window can be emptied by the
Clear
button. If the
Autoscroll
option is ticked, the list is scrolled automatically when a new line is added.
#terminal #advancedview
