5.SoftwareControl-LightwareDeviceController
HDMI-TPS-RX110AY series – User's Manual
37
Appliedfirmwarepackage:v1.5.0b3 | LDCsoftware:v2.5.9b2
5.4.3.
Audio Tab
Audio tab in Port parameters menu
The most important audio related information and settings are available on this tab.
Link Audio (I1)
This is the embedded TPS audio input line of the receiver. Clicking on the TPS icon results the settings panel
appearing on the right side. You can check the signal info of the port.
Available Settings:
▪
Mute/Unmuteport;
▪
Lock/Unlockport;
▪
Reloading factory defaults (see factory default settings in the
section).
HDMI OUT Audio (O1)
This is the embedded HDMI audio output line of the receiver. Clicking on the HDMI icon results the settings
panel appearing on the right side. You can check the signal info of the port.
Available Settings:
▪
Mute/Unmuteport;
▪
Lock/Unlockport;
▪
Reloading factory defaults (see factory default settings in the
section).
Audio Out (O2)
This is the de-embedded analog audio output line of the receiver. Clicking on the HDMI icon results the
settings panel appearing on the right side. You can check the signal info and the de-embeding status of the
signal.
Available Settings:
▪
Mute/Unmuteport;
▪
Volume(inpercent);
▪
Balance;
▪
Reloading factory defaults (see factory default settings in the
section).
#mute #unmute #lock #unlock #volume #balance #analogaudio
