Lightware HDBaseT HDMI-TPS-RX110AY User Manual Download

Page: 40 / 154

5.SoftwareControl-LightwareDeviceController

HDMI-TPS-RX110AYseries–User'sManual

Appliedfirmwarepackage:v1.5.0b3 | LDCsoftware:v2.5.9b2

5.6.1.

EDID Operations

Changing Emulated EDID

#edid

Step 1.

Choose the desired

EDID list

on the source panel and select an

EDID

Step 2.

Press the

Emulated

button on the top of the Destination panel.

Step 3.

Select the desired

port

on the right panel (one or more ports can be selected); the EDID(s) will be

highlighted with a yellow cursor.

Step 4.

Press the

Transfer

button to change the emulated EDID.

Learning an EDID

TheprocessisthesameaschangingtheemulatedEDID;theonlydifferenceistheDestinationpanel:press

the

User

button. Thus, one or more EDIDs can be copied into the user memory either from the factory memory

or from a connected sink (Dynamic).

Exporting an EDID

ATTENTION!

ThisfunctionisworkingonWindowsandmacOSoperatingsystemsand

under Firefox or Chrome web browsers only.

SourceEDIDcanbedownloadedasafile(*.bin,*.dator*.edid)tothecomputer.

Step 1.

Select the desired

EDID

from the Source panel (line will be highlighted with yellow).

Step 2.

Press the

Export

buttontoopenthedialogboxandsavethefiletothecomputer.

Importing an EDID

PreviouslysavedEDID(*.bin,*.dator*.edidfile)canbeuploadedtotheusermemory:

Step 1.

Press the

User

button on the top of the Source panel and select a

memory

slot.

Step 2.

Press the

Import

button below the Source panel.

Step 3.

Browsethefileintheopeningwindowthenpressthe

Open

button. Browsed EDID is imported into the

selected User memory.

ATTENTION!

The imported EDID overwrites the selected memory place even if it is not empty.

Deleting EDID(s)

TheEDID(s)fromUsermemorycanbedeletedasfollows:

Step 1.

Press

User

button on the top of the Destination panel.

Step 2.

Select the desired

memory

slot(s);oneormorecanbeselected(“SelectAll”

and“SelectNone”buttonscanbeused).TheEDID(s)willbehighlighted

with yellow.

Step 3.

Press the

Delete selected

button to delete the EDID(s).

5.6.2.

EDID Summary Window

Select an EDID from Source panel and press

Info

button to display EDID summary.

EDID summary window



 



Summary of Contents for HDBaseT HDMI-TPS-RX110AY



























































































































































Search results

Summary of Contents for HDBaseT HDMI-TPS-RX110AY

Reviews:

Related manuals for HDBaseT HDMI-TPS-RX110AY

Brands by name

Popular brands

Lightware HDBaseT HDMI-TPS-RX110AY, User Manual

Search results

Summary of Contents for HDBaseT HDMI-TPS-RX110AY

Reviews:

Related manuals for HDBaseT HDMI-TPS-RX110AY

Brands by name

Popular brands