5.SoftwareControl-LightwareDeviceController
HDMI-TPS-RX110AYseries–User'sManual
46
Appliedfirmwarepackage:v1.5.0b3 | LDCsoftware:v2.5.9b2
5.6.9.
Infra
ATTENTION!
The device has no built-in Infrared receiver and transmitter. For the complete usage attach
an IR emitter unit to the IR OUT and an IR detector unit to the IR IN connectors.
Infrared (IR) receiver and transmitter options can be found on this tab. There are three submenus are
availableunderit:
IR codes
,
Ports
, and
Clear all IR codes
.
IR Codes
UsercansetthenameoftheIRcode,thefingerprint(hash),andtherepeattimeoutinms,actionscanbe
ordered to each IR code as well.
IR codes window in Control menu
Description
Function
ID
Code number.
Name
You can give an unique name for the desired code.
Fingerprint (hash)
Fingerprint code in pronto hexa format.
Detected
Indicator gives feedback about the given IR code is detected currently.
Repeat timeout (ms)
You can set a timeout to avoid the involuntary code recurrence.
Actions
ActionbuttonsforthedesiredIRcode:
Save
:savingthefingerprint.
Cancel
:cancelingthefingerprint.
Learn
:learningthedetectedIRcode.
Detected IR fingerprints
You can check the detected IR codes in this panel. Pushing
Clear
button
deleting all current fingerprints and switch on or off the automatic
scrolling with the
Autoscroll
pipe.
20fingerprintscanbestoredinthedeviceatthesametime.Eachofthemcanbeorderedtoanactionin
Event Manager. For more details about events see
section.
Learning IR Codes
Step 1.
Connect the IR detector unit to the IR IN port of the receiver.
Step 2.
Click on the
Learn
button.
Step 3.
TurntheremotecontrollertotheIRdetector.Apop-upwindowappearsinLDC-pressyourremote
button to learn.
Step 4.
Oncethecodeisreceived,anewwindowpopsupinLDC-learningcompleted.Click
OK
to continue.
Step 5.
Optionally type a unique name for the code in the
Name
text box. The default name is code#, e.g.
code0.
#infra #infrared
