LifeSize Gateway-PRI, User Manual

Page: 88 / 196

80 LifeSize Gateway User Guide
Configuring Gateway Settings
(Gateway-PRI only) In the Voice Calls section
Voice Priority (0-63) field, enter a whole
number from 0 to 63 to set the priority level of
voice packets that the LifeSize Gateway sends
out. The default value is 46.
Note
You can click Restore Defaults to restore all default settings.
C
ONFIGURING
A
LERT
I
NDICATIONS
In the Alert Indications section of the Settings tab, you can select which events
trigger Simple Network Management Protocol (SNMP) traps. You can also
define multiple SNMP servers to which the LifeSize Gateway sends the SNMP
traps.
Note
The LifeSize Gateway supports traps in the SNMPv1 format.
Procedure
1
In the LifeSize Gateway interface, on the sidebar, click
Gateway (if not already selected).
2 Click the Settings tab.
3
Click the Alert Indications button.
4 In the Events section, select events in the Disabled events
field and click Add to select an event to monitor. Or, select an
event in the Enabled events field and click Remove to remove
that event from monitoring.
5
Select the Send SNMP Traps check box to configure the IP
address of the SNMP server to which the LifeSize Gateway
sends SNMP trap notifications of the events selected in the
Enabled events field. You can configure up to three different
SNMP trap servers.
6 In the Trap server IP and Port fields, enter the IP address and
port number for each SNMP server to which you want the
LifeSize Gateway to send SNMP trap notifications. To remove