LifeSize Gateway-PRI, User Manual

Page: 110 / 196

102 LifeSize Gateway User Guide
Configuring Gateway Settings
Procedure
1 In the LifeSize Gateway interface, on the sidebar, click
Gateway (if not already selected).
2
Click the Settings tab.
3 Click the Advanced button.
4
Click Commands .
The Advanced Commands dialog box appears.
NotifyLevel Changes the type and number of debug messages
that are generated.
Parameters:
0—Disables LifeSize Gateway logs.
3 (default)—Fatal error (LifeSize Gateway can
no longer provide service), a problem affecting
user functionality (for example, call connect
failure or no resources available), or status prints
for Customer Support use.
6—Debugging.
8—Extended debugging.
Remarks: We recommend that you do not exceed
a NotifyLevel of 6 as this might overload the
system with a very large debug message output.
Level 3 should be sufficient for normal usage.
Peer-to-Peer disconnect reason add Instructs the LifeSize Gateway under which
circumstances to reroute a call to different peer
device.
Parameters: Enter a number representing the
required H.323 call disconnect reason, as listed in
Table 3-6 .
Peer-to-Peer disconnect reason
remove Deletes the H.323 Call Disconnect Reason set by
the Peer-to-Peer disconnect reason add advanced
command.
Parameters: ALL—Enter a number representing
the required H.323 call disconnect reason, as
listed in
Table 3-6 .
Table 3-18 Advanced Command Settings (continued)
Command Description