LifeSize Gateway-PRI, User Manual

Page: 170 / 196

162 LifeSize Gateway User Guide
Introduction
I
NTRODUCTION
The LifeSize Audio Message Utility is an interactive GUI that enables you to
record and replace messages and upload new messages to the call routing
mechanisms in LifeSize devices.
Each LifeSize device has a built-in set of audio messages. The default messages
are in English. The LifeSize Audio Message Utility allows you to record new
messages in a different language or with different content to suit your
requirements. The LifeSize Audio Message Utility also enables you to replace
and upload new messages to the target LifeSize device.
There are two ways of using the LifeSize Audio Message Utility. The standard
utility functions enable you to play, record or replace messages. The Express
Setup guides you through the recording, replacing and upload procedure for
each of the voice messages.
Before You Begin
Before you can record, play and upload messages to the target LifeSize device,
you must
Save recorded messages as WAV files.
Know the IP address of the target device.
A
BOUT
G
ATEWAY
C
ALL
R
OUTING
The LifeSize Audio Message Utility provides audio messages for the call
routing mechanism in LifeSize Gateways. The call routing mechanism initiates
a series of voice messages that allow you to make choices and respond via the
keypad through dial tones (DTMF).
The routing mechanism enables you to dial through the LifeSize Gateway to an
IP network-based H.323/SIP/RTSP terminal when you do not know the
extension number of the destination terminal.
L
AUNCHING THE
U
TILITY
This section describes how to install and launch the LifeSize Audio Message
Utility.
Procedure
1 Copy the Audio Message Utility folder from the LifeSize
Gateway CD-ROM to your local computer.
Note You cannot run the Audio Message Utility from the LifeSize Gateway
CD-ROM.