LifeSize Gateway-PRI, User Manual

Page: 137 / 196

Configuring the LifeSize Gateway 129
Viewing Call Information
Bit Rate —Displays the maximum total bit rate allowed for this
service.
Support —Displays the status of the service: enabled or
disabled.
Procedure
1 In the LifeSize Gateway interface, on the sidebar, click
Gateway (if not already selected).
2
Click the applicable PRI Port or Serial Port tab.
3 Click the Supported Services button.
4
Select the Same as Port check box if you want to duplicate
settings from another LifeSize Gateway port that you choose
from the field. When selected, you cannot modify any settings
in this section. This option is unavailable in LifeSize Gateways
that support only one PRI port.
5 To enable or disable a service for this port, select it and click
Enable or Disable .
V
IEWING
C
ALL
I
NFORMATION
The Calls tab displays a list of the calls currently defined in the LifeSize
Gateway and the basic details of each call. The Calls tab displays the following
information in table format:
Call ID —Displays the call identifier.
Source Party Number —Displays the alias that identifies the source
endpoint of the call.
Destination Party Number —Displays the alias that identifies the
destination endpoint of the call.
Start Time —Displays the time at which the call began.
Total Call Bandwidth —Displays the total bandwidth (in Kbps) used
for this call on both sides.
Encryption —Indicates the level of encryption currently in use for
the specified participant: best effort, encryption required, or strong
encryption required.
Total —Field indicates the total number of calls currently defined in
the LifeSize Gateway.