manualshive.com logo in svg

Licht-Technik Motoryoke BigBee MB-D1, Functional Description

Functional Description: The Licht-Technik Motoryoke BigBee MB-D1 is a cutting-edge motorized yoke system designed to provide exceptional lighting control for professional stage and event productions. This efficient and versatile product enhances your creative lighting possibilities. For a detailed manual, easily download it for free from our website.

Share
Download
background image

P37 Interchanging TILT moving direction

With this function the 

TILT moving direction

 can be set.

Range of values:

0 = normal (standard)
1 = reverse direction

Recommended value:

0

Operation

:

                              depress   You are now on menu level. The last adjusted menu 
                                             point is displayed, e.g.:
                                             

menu P01: DMX address motoryoke

                              depress   ... until 

menu P37

 is displayed.

                              depress   The second line displays the currently adjusted value.

                              depress   Adjust the desired direction.   

                              depress   You are back on menu level.

                              depress   The equipment is ready for operation.

Motoryoke MB D1 V4.56 Rev 1.06                                                                                    41

Menü

Menü

Ok

Ok

Summary of Contents for Motoryoke BigBee MB-D1





















































Reviews:

No comments

Related manuals for Motoryoke BigBee MB-D1

ZOLL X Series Operator'S Manual preview
X Series
Brand: ZOLL Pages: 344
ABB C571-AC Instructions Manual preview
C571-AC
Brand: ABB Pages: 9
KaVo 4040 Operating, Maintenance And Assembly Instructions preview
4040
Brand: KaVo Pages: 16
GE Vivid E9 Service Manual preview
Vivid E9
Brand: GE Pages: 802
iET SRL Series Operation Manual preview
SRL Series
Brand: iET Pages: 17
Parata Mini Customer Manual preview
Mini
Brand: Parata Pages: 40
Nitecore NPL20 User Manual preview
NPL20
Brand: Nitecore Pages: 4
Parkside PFMR 1600 A1 Operation And Safety Notes preview
PFMR 1600 A1
Brand: Parkside Pages: 95
V.ORLANDI RP10 Installation, Operating And Maintenance Instructions preview
RP10
Brand: V.ORLANDI Pages: 144
Waters 2707 Quick Install Manual preview
2707
Brand: Waters Pages: 4
Waterpik ClearView Instructions For Use preview
ClearView
Brand: Waterpik Pages: 2
Zero 88 Betapack 4 User Manual preview
Betapack 4
Brand: Zero 88 Pages: 12
Zest4Leisure Horizon Arch Instructions preview
Horizon Arch
Brand: Zest4Leisure Pages: 4
Zeiss ATLAS 9000 Service Manual preview
ATLAS 9000
Brand: Zeiss Pages: 119
Zehnder Rittling ComfoFond-L Installation Manual preview
ComfoFond-L
Brand: Zehnder Rittling Pages: 32
MÄDLER FS Mounting And Operating Instructions preview
FS
Brand: MÄDLER Pages: 4
Jumil 4200SH Operator'S Manual preview
4200SH
Brand: Jumil Pages: 78
Kanlux TEAR N Manual preview
TEAR N
Brand: Kanlux Pages: 4

Brands by name

Popular brands

Load more brands