Make sure that the safety belts have the right diameter. For weights up to 60 kg a belt of
10mm diameter is necessary for the one way method and a belt of 6mm is necessary for
the two way method.
The user is
responsible
for the correct use of safety parts!
Make sure that all parts which are mounted on the headlight are right
tightened
.
Lever forces
must not have an effect on the Motoryoke. This means that the installed
motoryoke must not be
shifted
or
bended
! It is also forbidden when fastening spigot is
opened.
Do not push, pull or
drag
That applies also to the
transport
. It is absolutely forbidden to hang up the yoke on its
spigot when transported!
If you want to use a transport
carriage
, it must be certified by Licht-Technik!
The fastening spigot must be
checked visual
once a year. The spigot must be in right
angel to the housing. This must be checked in
front
and
side
view. A
protractor
can be a
help.
Furthermore, the
spigot
itself and the
surface
of the yoke must not be deformed. Make
sure that the spigot is not loose or unformal.
If the spigot is visibly
damaged
or deformed the motoryoke must not be used anymore.
The device has to be sent to Licht-Technik.
Motoryoke MB D1 V4.56 Rev 1.06 5
90°
One way safety belt
Two way safety belt