manualshive.com logo in svg

Licht-Technik Motoryoke BigBee MB-D1, Functional Description

Functional Description: The Licht-Technik Motoryoke BigBee MB-D1 is a cutting-edge motorized yoke system designed to provide exceptional lighting control for professional stage and event productions. This efficient and versatile product enhances your creative lighting possibilities. For a detailed manual, easily download it for free from our website.

Share
Download
background image

P32 Selecting the user language

At   this   point   you   can   choose   in   which   language   the   texts   and   messages   should   be
displayed.

Range of values:

0 = German
1 = English

Operation

:

                              depress   You are now on menu level. The last adjusted menu 
                                             point is displayed, e.g.:
                                             

menu P01: DMX address motoryoke

                              depress   ... until 

menu P32

 is displayed.

                              depress   The second line displays the currently adjusted value.

                              depress   Adjust the desired language.   

                              depress   You are back on menu level.

                              depress   The equipment is ready for operation.

38                                              

Motoryoke MB D1 V4.56 Rev 1.06

Menü

Menü

Ok

Ok

Summary of Contents for Motoryoke BigBee MB-D1





















































Reviews:

No comments

Related manuals for Motoryoke BigBee MB-D1

zipwake E Series Operator'S Quick Manual preview
E Series
Brand: zipwake Pages: 2
zipwake E Series Start-Up Checklist preview
E Series
Brand: zipwake Pages: 2
Camozzi 50 Series Mounting Instructions preview
50 Series
Brand: Camozzi Pages: 2
Raytech TR-1 Instruction Manual preview
TR-1
Brand: Raytech Pages: 21
Teac LX Series Specifications preview
LX Series
Brand: Teac Pages: 2
laerdal HEARTSTART Quick Start Manual preview
HEARTSTART
Brand: laerdal Pages: 2
RASHA PROFESSIONAL Orbit Quick User Manual preview
Orbit
Brand: RASHA PROFESSIONAL Pages: 11
MADRIX LUNA Technical Manual & Quick Start Manual preview
LUNA
Brand: MADRIX Pages: 24
MADRIX LUNA Quick Start Manual preview
LUNA
Brand: MADRIX Pages: 28
Federal Signal Corporation VECTOR Installation And Maintenance Instructions preview
VECTOR
Brand: Federal Signal Corporation Pages: 2
Harman Kardon EQ8 Owner'S Manual preview
EQ8
Brand: Harman Kardon Pages: 7
Hantek DPO6000 Series Product Manual preview
DPO6000 Series
Brand: Hantek Pages: 124
Hameg HO720 Installation Manuallines preview
HO720
Brand: Hameg Pages: 10
IBEX TX31 Quick Start Manual preview
TX31
Brand: IBEX Pages: 4
P-Q Controls 504 Series Operation Manual preview
504 Series
Brand: P-Q Controls Pages: 5
Irwin Powerbase S8 Instructions preview
Powerbase S8
Brand: Irwin Pages: 2
LABORIE NXT Series Owner'S Manual preview
NXT Series
Brand: LABORIE Pages: 116
Fisher Scientific 04-977-3000 Operation Manuals preview
04-977-3000
Brand: Fisher Scientific Pages: 44

Brands by name

Popular brands

Load more brands