Programming and adjusting the 0% and 100% focus position:
Use
P03
(detailed description on page 28) for
automatic
adjustment of this two positions:
Press
MENU
, select P03 with the
UP
and/or
DOWN
key.
When P03 is indicated press
MENU
again
to gain access.
Press
MENU
again to start the adjustment move
The focus drive moves now from 0% position to 100% position to find the
endstops
.
The device is now
ready
for operation.
Set the pan
middle position
mechanically and roughly of pan axis like illustrated on page
21.
Program the pan
middle position
exactly at the display, refer to
programming the middle
position
on page 29
Program the
moving range
of the
PAN
-axle with P11. Refer to
PAN-axle moving range,
page
20.
We recommend that the
tilt programmings
should
not
be changed by the user. It is
much more difficult than the pan axis and harder to understand. Better use and never
change the factory settings. With that you can move the lamp on tilt a little bit to the top
and 90° to the bottom.
Motoryoke MB D1 V4.56 Rev 1.06 13
