LI-COR LI7200RS, Instruction Manual

Page: 85 / 226

Connect to an LI-8100A Soil Gas Flux System
If you are connecting an LI-8100A to FluxSuite, you do so through this tab. You
need to enter the LI-8100A IP address in the field labeled
Hostname
. Click
Apply
8100 Settings
after entering the
Hostname
.
Connect to a PhenoCam Camera
Under the PhenoCam tab, you can connect to a CC5MPX digital camera. When
connected, the images will be posted to FluxSuite (assuming you have registered
and configured everything else). To connect with the camera, check the box, then
enter the camera IP address in the field labeled
Hostname
. Enter the MAC Address
that is printed on the camera's exterior label. Click
Apply Camera Settings
to con-
nect.
Section 3. Operation
3-43 Connecting with the SmartFlux or SmartFlux 2 System