LI-COR LI7200RS, Instruction Manual

Page: 163 / 226

1 Attach the new sensor head to the LI-7550.
2
Connect the instrument to a computer and establish communications.
3
Select
Config Files > Open Configuration
. Choose the file saved earlier; the coefficients will
automatically be loaded.
4 Manually enter the Box Pressure calibration coefficients from the Calibration Certificate that
came with the sensor head under the Coefficients tab.
The Box Pressure coefficients saved in the old configuration file should not be used
with the new Analyzer Interface Unit.
Section 7. Software Reference
7-25 Automatic