LI-COR LI7200RS, Instruction Manual

Page: 215 / 226

The Query Command
The Query (?) command is used to query the instrument for any configuration para-
meter individually, as well as any node in the configuration tree.
Command Remarks
(Outputs ?)
(Calibrate ?)
(Coef ?)
(Outputs ?)
(Data ?)
(Diagnostics ?)
(EmbeddedSW ?)
(Inputs ?)
(Info ?)
(Network ?)
(MeteoDevices ?)
(MeteoSensors ?) The query for individual parameters works only for
configuration parameters and not data or diagnostic
information. All commands are followed by a line feed (lf).
Table D-8 . Query Commands
Examples:
The query (Outputs(RS232(Freq ?)))lf would respond:
(Outputs (RS232 (Freq 5)))
whereas the query (Calibrate ?)lf causes a Calibrate record to be put in the output
queue.
Example Response:
(Calibrate (ZeroCO2 (Val 0.8945)(Date 26 08 2009 10:37))(SpanCO2 (Val 1.0068)
(Target 597.2)(Tdensity 23.154)(Date 26 08 2009 11:00))(Span2CO2 (Val 0.0)(Tar-
get )(Tdensity )(ic 0.106207)(act 0.105489)(Date 4Cal))(ZeroH2O (Val 0.791075)
(Date 26 08 2009 11:20))(SpanH2O (Val 1.00585)(Target 12.00)(Tdensity 447.421)
(Date 26 08 2009 11:37))(Span2H2O (Val 0.0)(Target )(Tdensity )(iw 0.059434)
(awt 0.0590885)(Date 4Cal)))
(Coef ?)lf causes a Coefficients record to be put in the output queue.
Appendix D. Configuration Grammar
D-19 Appendix D. Configuration Grammar