LI-COR LI-6400 Manual Download Page 99

Page: 99 / 846

Guided Tours

Tour #4: Logging Data

Using the LI-6400

3-47

Put

RH_S

on the Y axis

Press

to pick a Y variable. (If you get the V/R choice again as in Step 5,

press

). Highlight RH_S, and press

enter

Now press

escape

to signal no more Y variables (youÕll be asked for up to 5

variables for this axis, and you only want one).

Now enter * for the Min and again for the Max. (If the min and max are not
automatically asked, press R to do this).

Press

escape

until you get back to GraphItÕs main screen.

Plot the graph

If it didnÕt plot automatically upon leaving the configuration editor, then press

to plot the graph (Figure 3-39).

These data illustrate the concept of an operating envelope for humidity con-
trol; if we draw a line around these data, we draw the envelope (Figure 3-40).

Save this definition for future use.

Press

escape

to stop viewing the graph, and return to GraphItÕs main screen.

Press

(

Config SaveAs

), and name the file Ò

RH & Flow

Ó. (Storing this file uses

the Standard File Dialog again, just as you saw when you opened a log file.)

Figure 3-39. Sample humidity as a function of flow rate from Experiment #1.

Full Bypass

Full Scrub

Full Bypass

Full Scrub

Figure 3-40. The operating envelope from Experiment #1. Inside the shaded area is
achievable, outside is not

Summary of Contents for LI-6400















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LI-6400

Reviews:

Related manuals for LI-6400

Brands by name

Popular brands

LI-COR LI-6400, Manual

Search results

Summary of Contents for LI-6400

Reviews:

Related manuals for LI-6400

Brands by name

Popular brands