LI-COR LI-6400 Manual Download Page 790

Page: 790 / 846

AutoProgramming Reference

Useful AutoProgram Commands

25-12

Using the LI-6400

Useful AutoProgram Commands

All functions starting with LP... are public LPL functions defined in the file

/sys/open/open.lp

. The descriptions that follow use the format described in

Def-

initions

on page 24-11.

Standard Commands

LPCleanup

Required

Initial:

Final:

This should be the last thing before quitting if you did an LPPrep earlier.
Related Keywords:

LPPrep

LPDeregLoop

Deregister a loop

Initial:

Final:

See LPRegLoop.

LPLog

Logs another observation to the log file.

Initial:

Final:

LPLogComment

Logs a string to the log file as a comment.

Initial:

Text

remark

Final:

This function builds a quoted string made up of the current time (HH:MM:SS), fol-
lowed by

remark

, and outputs it to the log destination.

LPLoopStat

Register a loop

Initial:

Final:

See LPRegLoop.

LPMatch

Matches the IRGAs

Initial:

Final:

This function toggles the match valve, waits for the water reference analyzer to stabi-
lize, then waits up to 1 minute for the CO

sample analyzer to stabilize. If it does, the

sample water and CO

IRGAs are adjusted to read the reference IRGAs. Otherwise, a

warning message is logged.

Summary of Contents for LI-6400















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LI-6400

Reviews:

Related manuals for LI-6400

Brands by name

Popular brands

LI-COR LI-6400, Manual

Search results

Summary of Contents for LI-6400

Reviews:

Related manuals for LI-6400

Brands by name

Popular brands