L'HOTELLIER
COMPONENT MAINTENANCE MANUAL
12589-( )
PRINTED IN FRANCE
26-20-50
Page 6001
APR 01/11
REPAIR
TASK 26-21-39-300-801-A01
1. General
A.
This section gives the data and procedures to repair the container. Also, the items that cannot be
repaired, and must be replaced, are identified.
TASK 26-20-50-940-804-A01
2.
Tools, Fixtures, Equipment and Materials
NOTE : Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND CONSUMABLES section for the
specifications and where to get the necessary tools.
NOTE : You can use equivalent alternatives for the items given in table.
Table 6001
Repair Materials and Equipment
DESCRIPTION PART
NUMBER
Tungsten Inert Gas Welder
None
Tap and Die Set
None
Thread Pressure Switch
None
Steel, CRES, 304L
None
Vertical Milling Machine None
Fly Cutter
None
Lathe None
Sandpaper, 320 Grit
None
Alcohol None
Dye Penetrant Kit
None
Grinding tool
70291
TASK 26-20-50-300-802-A01
3. Threads
A.
Get a tap or die of the correct thread size.
B.
Put the tap or die into or onto the threads to be repaired.
C.
Put cutting oil on the threads.
D.
Turn the tap or die into or on the threads, then remove the tap or die.
E.
Remove the oil and cuttings from the threads as specified in CLEANING section.
F.
Use an applicable thread gauge and measure the threads for the correct major, minor, and pitch
diameters as specified in FED-STD-H28A. Discard the part if the threads are not equal, are
chipped, or have incorrect diameters.
The document reference is online, please check the correspondence between the online documentation and the printed version.
