L'HOTELLIER
COMPONENT MAINTENANCE MANUAL
12589-( )
PRINTED IN FRANCE
26-20-50
Page 5001
APR 01/11
CHECK
TASK 26-20-50-200-801-A01
1. General
A.
Do an inspection to find damage and to make sure that the repair has been done correctly.
B.
Use the data in Table 5001 and the procedures to do the inspection.
Table 5001
Inspection Data
ITEM TYPE
OF
INSPECTION
CHECK NECESSARY
DATA
Container Dimensional
Minimum
wall
thickness
1,27 mm (0.05 in)
Container external
surface
Visual
Bulges, nicks, weld cracks
No bulges, nicks, weld
cracks
Dimensional
Scratches
No scratches deeper than
0,1 mm (0.004 in) or
longer than 50,8 mm
(2 in)
Dimensional
Gouges
No gouges deeper than
0,1 mm (0.004 in)
Visual
Loose or missing
components
No loose or missing
components
Visual
Fire
damage,
signs
container was too hot
No fire or heat damage
Container internal
surface
Visual
Moisture, chips, oil, or
other contamination
None allowed
Visual
Cracks, pits, corrosion
None allowed
Neck
Visual
Thread damage
No damaged threads
Dimensional
Minimum fitting height
Refer to paragraph 6.
Fill and safety fitting
Visual
Thread damage
No damaged threads
Dimensional
Minimum fitting height
Refer to paragraph 7.
Pressure gage
Visual
Corrosion, dirt
No corrosion or debris
Visual
Cracks, bends, warps,
distorted
No damage you can see
Identification Plate
Visual
Legibility
No damage
The document reference is online, please check the correspondence between the online documentation and the printed version.
