background image

InterReach Fusion SingleStar Installation, Operation, and Reference Manual

CONFIDENTIAL

D-620605-0-20 Rev D

Limited Warranty

Seller warrants articles of its manufacture against defective materials or workmanship for a 
period of one year from the date of shipment to Purchaser, except as provided in any warranty 
applicable to Purchaser on or in the package containing the Goods (which warranty takes 
precedence over the following warranty). The liability of Seller under the foregoing warranty 
is limited, at Seller’s option, solely to repair or replacement with equivalent Goods, or an 
appropriate adjustment not to exceed the sales price to Purchaser, provided that (a) Seller is 
notified in writing by Purchaser, within the one year warranty period, promptly upon 
discovery of defects, with a detailed description of such defects, (b) Purchaser has obtained a 
Return Materials Authorization (RMA) from Seller, which RMA Seller agrees to provide 
Purchaser promptly upon request, (c) the defective Goods are returned to Seller, 
transportation and other applicable charges prepaid by the Purchaser, and (d) Seller’s 
examination of such Goods discloses to its reasonable satisfaction that defects were not 
caused by negligence, misuse, improper installation, improper maintenance, accident or 
unauthorized repair or alteration or any other cause outside the scope of Purchaser’s warranty 
made hereunder. Notwithstanding the foregoing, Seller shall have the option to repair any 
defective Goods at Purchaser’s facility. The original warranty period for any Goods that have 
been repaired or replaced by seller will not thereby be extended. In addition, all sales will be 
subject to standard terms and conditions on the sales contract.

Licensed Operators

LGC Wireless’ equipment is designed to operate in the licensed frequency bands of mobile, 
cellular, and PCS operators. In the USA, the EU, and most countries this equipment may 
only be used by the licensee, his authorized agents or those with written authorization to do 
so. Similarly, unauthorized use is illegal, and subjects the owner to the corresponding legal 
sanctions of the national jurisdiction involved. Ownership of LGC Wireless equipment 
carries no automatic right of use. 

Summary of Contents for InterReach Fusion SingleStar



























































































































































Reviews: