LG STB-5500 Commercial Mode Setup Manual Download

Page: 83 / 97

206-4310

Reference: Using Media Share Features (Cont.)

Smart Share with Wi-Fi Direct

The following steps describe how to access and use Wi-Fi Direct (i.e., to connect to a wireless LG device).

Remember that you must also turn ON Wi-Fi Direct and launch the Smart Share application on the LG

device.

Note:

Screen Share MUST be enabled in the Media Share Menu in addition to Smart Share in order for

guests to use Wi-Fi Direct (see “Media Share Setup” on pages 64 to 65).
1. Turn ON the STB/display panel, and press

MENU

on the Installer Remote to display the STB menus

(either the setup menus or the Function Menu depending on whether the STB is or is not in Pass-through

Mode).

2. Use the Up/Down arrow keys to select/highlight the

General

menu icon, and then press

3. In the General Menu, use the Up/Down arrow keys to select

Wi-Fi Direct

, and then press

Picture

Sound

Channels

General

Safety

Accessibility

GENERAL

Language

Room Info

Time & Date

Timers

Wi-Fi Direct

Standby Light

Set ID

SIMPLINK (HDMI-CEC)

USB Eject

Home/Store Mode

Note:

The example at left

shows the General Menu when

the STB is in Pass-through

Mode. The Wi-Fi Direct screen

is the same whether the STB is

or is not in Pass-through Mode.

Picture

Sound

Channels

General

Safety

Accessibility

WI-FI DIRECT

General /

[TV]LG Smart TV

REFRESH LIST

Note:

If Wi-Fi Direct is currently grayed out, you may need to exit/turn OFF another Media Share

feature in order to use Wi-Fi Direct. For example, make sure that SoftAP is turned OFF. See also note

on previous page regarding simultaneous use of Media Share features.

4. When you access the Wi-Fi Direct screen, the STB will automatically initiate a search for all available

Wi-Fi Direct enabled wireless devices, including mobile devices, laptops, etc. Devices found will be listed

in the lower half of the screen.

Note:

If the search does not initially locate any devices, you can select

REFRESH LIST

and press

to rescan.

5. Use the Up/Down arrow keys to select/highlight the device with which you wish to share, and then

press

The share request will be sent to the targeted device. The user of that device may choose to allow or not

allow the share connection. Similarly, other devices may request share connections with this STB (pop-up

share requests typically appear in the bottom right of the display panel screen).

(Continued on next page)

Summary of Contents for STB-5500


































































































Search results

Summary of Contents for STB-5500

Reviews:

Related manuals for STB-5500

Brands by name

Popular brands

LG STB-5500, Commercial Mode Setup Manual

Search results

Summary of Contents for STB-5500

Reviews:

Related manuals for STB-5500

Brands by name

Popular brands