19
206-4310
EZ-Manager Wizard (Cont.)
STB Configuration Options
From the STB Configuration Options screen, you can choose how to proceed with the configuration
of this STB/display (assuming you do not opt to exit the wizard, which you may also do at any time).
Note: If you intend to use the Zoning feature(s) on the STB for location-specific
configuration purposes, select the “Zones & Room Number” option from this screen
and assign the appropriate STB Zone # and/or the Wi-Fi Zone # in the STB BEFORE
you continue with additional configuration.
STB CONFIGURATION OPTIONS
.
To configure the STB for Pro:Centric operation, select NEXT.
.
To set the optional Zoning features, select ZONES & ROOM NUMBER.
.
To configure the STB using a USB memory device, select USB CONFIGURATION.
This wizard will continue automatically in 60 seconds.
ZONES & ROOM NUMBER
01
X
USB CONFIGURATION
NEXT
Note:
If there is no user action in this screen within one minute, the wizard will automatically
continue to the next configuration step.
Use the Up/Down arrow keys on the Installer Remote to navigate between options on this screen.
•
To continue with Pro:Centric configuration, select
NEXT
(default) and press
OK
on the Installer
Remote. See “Configure Pro:Centric Settings” on pages
21 to 25 for additional information.
• To set the Zoning feature(s) on the STB, select
ZONES & ROOM NUMBER
. See “Zones and
Room Number Assignments” below for further information.
• To access the STB Manager / USB download options, select
USB CONFIGURATION
. See “USB
25 to 26 for further information.
Note:
If you choose to exit the EZ-Manager Wizard from this point on, you will have the option to
save any settings made by selecting
SAVE & EXIT
in the exit confirmation pop-up window. Or, you
can exit the wizard without saving any settings by simply selecting
EXIT
in the confirmation pop-up
window.
Zones and Room Number Assignments
You may complete one or more of the fields in the Zones, Label, and Room Number
screen or
leave them at their default settings (STB Zone and Wi-Fi Zone) or blank (Label and Room Number),
as desired. However, if you intend to use either of the Zoning features—STB Zoning and/or Wi-Fi
Zoning—on this STB, you MUST specify the appropriate values in the STB Zone and/or Wi-Fi
Zone fields as described on the following page
. See also Reference section, “Using the STB’s
Zoning Features,” for further information.
