manualshive.com logo in svg

LG STB-5500, Commercial Mode Setup Manual, Page: 68 / 97

Share
Download
LG STB-5500 Commercial Mode Setup Manual Download Page 68

68

206-4310

(Continued from previous page) 

Select the file(s) to download, and then select UPDATE below.

Insert Background Image(s)

None

Update STB Software

STB_CPU_SW.epk

Update PTC Software

STB_PTC_SW.txt

Import Clone File 

STB_IM.tlx

<                                                                      

 >

         

X

USB DEVICE

STB MANAGER

Ez Download

USB 1: 

Device Name

Ez Download

Insert Background Image(s)

Update STB Software

Update PTC Software

Import Clone File 

Diagnostics

UPDATE

Image1.jpg                        Image2.jpg                     

    

Image3.jpg

Image4.jpg                        Image5.jpg                     

   

Image6.jpg

Image7.jpg                        Image8.jpg                     

 

 

  

Image9.jpg

6.  Use the Up/Down arrow keys to select 

Update STB Software

 or 

Update PTC Software

, as 

applicable, and press 

OK

.

Depending on your selection, a list of either STB or PTC software files stored in the LG_DTV 

folder on the USB memory device will be displayed on the screen. Above the listing of files, 

you can also see the current version of STB or PTC software. The following screen sample 

illustrates an Update STB Software screen. 

         

X

USB DEVICE

UPDATE

Select the file to download, and then select UPDATE below.

Current STB Software Version: 

version#

filename.epk/Version: version#

filename.epk/Version: version#

STB MANAGER

Update STB Software

USB 1: 

Device Name

Ez Download

Insert Background Image(s) 

Update STB Software

Update PTC Software

Import Clone File 

Diagnostics

7.  Use the arrow keys to select/highlight the update file to download, and then press 

OK

. 

8.  When you are ready to download the update, select 

UPDATE

 on the screen, and then press 

OK

 on the Installer Remote.

Software update progress will be displayed on the screen. Do NOT remove the USB device until 

the software update is complete. When the software update is complete, an UPDATE COMPLETE 

pop-up banner will briefly be displayed at the bottom of the screen, and then, the STB will reboot.

 

Reference: Updating STB Software using a USB Memory Device 

(Cont.)

Summary of Contents for STB-5500


































































































Reviews:

No comments