73
206-4310
Reference: Auto Input(s) Sensing Feature
This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable
auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux
inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual
inputs), refer to the table on the following page.
Note:
When both item 042 AUTO INPUTS
and
item 041 SIMPLINK EN are enabled in the Installer Menu,
HDMI inputs will be detected by SIMPLINK, but the Auto Input(s) Sensing Feature will not function.
In the Installer Menu, an informational code is displayed at the right of each Auto Inputs value, for example:
PTC INSTALLER MENU
STB_5500
CPU
-
CTV
042 AUTO INPUTS 225 765XXXX0
UPN 000-000-000-000 SW 5331 7F60
PTC V#.##.###
CPU V#.##.##.##
Each code consists of eight characters that identify the Aux input(s) for which auto-sensing is enabled.
The following table identifies the Installer Menu display code Input # for each Aux input that is available on
the STB-5500. The table also identifies the Installer Menu item associated with each Aux input. Remember
that in order for auto-sensing to be enabled for an input, that input must also be enabled in the Installer
Menu.
Installer Menu
Display Code
Input #
Aux
Input
Installer Menu
Item
Function
0
AV
039
REAR AUX EN
6
HDMI 1
035
HDMI1 ENABLE
7
HDMI 2
091
HDMI2 ENABLE
5
HDMI 3
*
092
HDMI3 ENABLE
AUTO INPUTS Display Code
This example illustrates Installer Menu item 042 value
225, which enables auto-sensing for all available Aux
inputs. The input #s in the display code (7, 6, 5, 0 in
this example) identify the enabled Aux inputs. See
first table below for a listing of the STB-5500 Aux
inputs and their corresponding display code input #s.
The second table below shows the display codes for
all item 042 values.
* HDMI 3 port on expansion interface connector.
